Oops! Sorry!!


This site doesn't support Internet Explorer. Please use a modern browser like Chrome, Firefox or Edge.

HHO Agro kit HS 10,000 Pro (24V)

HHO Agro kit – Save Fuel by 25% and reduce emissions by 78%.
Suitable for agricultural machinery with diesel engines of 5000cc to 8000cc displacement and a 24V charging system. It's plug 'n' play – easy to install and setup.

Includes Dynamic PWM for automated control of HHO generator optimiser. 

$13,239 inc tax
DESCRIPTION

This is a plug ’n' play system, which is easy to install behind the cabin in any diesel truck.

Does not need any engine mod­i­fi­ca­tions or tam­per­ing of the fuel man­age­ment or elec­tri­cal systems.

No com­puter soft­ware pro­gram­ming, set­ting up, tim­ing or mix­ture adjust­ments are required on the vehi­cle.

This hydrogen sys­tem for semi trucks has a built-in auto­matic start & stop function, auto­matic safety shut­down, and regulates the production of oxy-hydrogen gas based on the RPMs of the engine.
Easy & Quick installation
High-qual­ity components
Fully auto­mated Ampere lim­iter built-in
No run-on after shut­down
No backfire possibility
Water level sensor
More than 3000 kilometres with one refill
Fully automated


Equipped with a Dynamic PWM to control the amperes and production of HHO gas depending on the engine RPMs. There is a LED indicator installed near the dashboard to indicate when the reservoir needs to be refilled with electrolyte.
Most trucks make about 15,000km per month, which at minimum fuel saving of 2 litre per 100km equals 450L of diesel fuel saved!

TECHNICAL DETAILS

Dimensions: 52 x 40 x 25 cm
Weight: 28 kg
Voltage: 24 – 29 VDC (from vehicle's battery)
Material: Stainless steel INOX 316L Ti
Configuration of the plates: + NNNNNNNNNN + NNNNNNNNNN -
(+ positive, N-neutral, – negative)
Amperage: 3 to 30 Amp
Working surface: 4394 sq cm
Capacity: up to 240 litres of gas per hour
The required ratio of the electrolyte (water-KOH): 5%-15%24
Weather and water-proof casing. Ventilated

PACKAGE CONTENTS

1 x HHO Dry cell

2 x HHO 8L tank/reservoir

1 x HHO bubbler

Tubing – 6m

Wires:

Red 6 sq mm – 3.00m

Black 6 sq mm – 2.00m

Blue 1.5 sq mm – 3.00m

Fuse and fuse holder 30A x 2

Inlet gas connector

All electrical connectors

Installation instruction + scheme

Instructions for use

Weight 30 kg
Dimensions 60 × 30 × 70 cm